Chicago Pneumatic BlueTork Nutrunners CP7600xB -- ASTAC

Chicago Pneumatic BlueTork Nutrunners CP7600xB -- ASTAC

     ASTAC AIR COMPRESSOR ENGINEERING SDN BHD

 

 

 

Chicago Pneumatic

 

BlueTork Nutrunners CP7600xB -- ASTAC

 

 

Product Descriptions: 

 

The BlueTork nutrunner provides high user-comfort when handled, and can reduce maintenance issues. Since the tool uses continuous driving force, instead of impact force, it is quiet at 79dBA, with vibration of less than 2.5m/s.

 

The BlueTork nutrunner enables operators easily to re-set torque for each use, providing accurate, precise tightening to the original equipment manufacturer's guidelines. The shut off valve controls the tightening process, while the torque reaction is taken by a reaction bar. The tool uses a dual motor setup which provides initial run-down at 100 rpm (50 ft.lbs) to quickly snug the nut, while the second motor rotates at 8 rpm to deliver the final specified torque.

 

The BlueTork nutrunner is available in four versions (of 7 models) for maximum user choice: the CP7600 with one torque setting in forward only; the CP7600R with one torque setting with forward and reverse; the CP7600-4P which features four torque settings in forward only; and, the CP7600R-4P, featuring four torque settings with forward and reverse. Some versions can also be specified with an extended gearbox to reach deeper bolts. In addition to easy handling, the CP7600 series features a simple swing bar reaction mechanism for easy alignment and quick operation.

 

 

Benefits

 

  • Selection Up to 4 calibrated tightening Torque
  • Accurate torque
  • Increased operator comfort for greater productivity
  • Fast rundown​

 

 

Features

 

  • Air Shut-off clutch at preset torque
  • Integrated reaction bar standard with blade
  • Low noise level: 79 dB(A)
  • Almost no vibration : <2,5 m/s²

 

 

Specifications

 

 

  Metric Imperial
Model CP7600xB  
Part number 8941076010  
Air inlet thread size 40 "  
European Directives 2006/42/EC  
European Standards EN ISO 11148-6:2012  
Free speed 100 rpm  
Free speed air consumption 19 l/s 40 cfm
Handle type Pistol  
Length 328 mm 12.9 "
Maximum Torque (fwd) 900 Nm 660 ft.lbs
Maximum Torque (reverse) 900 Nm 660 ft.lbs
Net weight 6 kg 13.2 lb
Reaction bar xB reaction bar  
Reversible Non reversible  
Socket retainer Hole  
Sound Power 90 db(A)  
Sound pressure 79 db(A)  
Square drive 1 "  
Torque preset # 1  
Vibration ISO ISO-28927-2  
Working Torque Range (fwd) 450 - 900 Nm 330 - 660 ft.lbs
Working Torque Range (reverse) 450 - 900 Nm 330 - 660 ft.lbs

 

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Nutrunners