-crop-200x200.png)
Golden Star XH7130 CNC vertical machining machine for CNC drilling CNC milling CNC boring CNC reaming CNC tapping
XH7130 vertical machining center
[Workbench area]: 300mm*600mm [XYZ axis travel]: 500mm*295mm*450mm
Standard configuration
- Kanedi system, disc type tool magazine, pneumatic knife cylinder, lighting system, cooling system, automatic lubrication system, complete set of random tools, horn, BT40-ER32-100 holder
Optional
- FANUC, Siemens, Huazhong CNC system, bucket magazine, precision pliers, BT40 Latin, BT40 milling chuck, combined platen, can increase the fourth axis, etc.
XH7130 vertical machining center is a cost-effective vertical machining center developed for our small hardware parts and products. This machine has the advantages of strong rigidity, stable precision, low failure rate and good reliability. It is a small product processing. The machine tool has a strong overall structure, and the machine tool structure is optimized by finite element analysis, and the rigidity is stronger and the structure is more stable.
Rib type head design: the internal ribs are thickened and the structural rigidity is increased to greatly improve the processing stability.
Machining characteristics: All the performance of both the drill center and the machining center.
The XH7130 machining center can realize automatic cycle machining such as CNC drilling, milling, boring, reaming and tapping. It is suitable for the production of molds and batch parts. It can coordinate the boring and accurately and efficiently complete the cams of various complex curves. Automatic processing of parts such as prototypes, laminated films, curved grooves and school teaching.
The imported spindle unit has high speed and good reliability. The guide rail has a large span and good overall rigidity. Among them XH7130: X, Y, Z three axes use linear guides.
XH7130 vertical machining center advantage
1. Bed: It is made of high-grade resin sand casting and box structure design. It is aging-treated to eliminate internal stress, and the material is tough. With box structure design and high rigidity body structure, the machining center has sufficient rigidity and strength. The whole machine exhibits the characteristics of cutting resistance and high precision.
2. Drive shaft: The X/Y axis is designed with a linear guide. The column, saddle, head and base are made of high-grade resin sand casting and box structure design.
3. Screw: Three-axis precision ball screw with high-precision double-nut preloading, combined with the lock-pull design of the two-end support seat, can eliminate the transmission backlash and compensate the error caused by temperature rise in advance to ensure the positioning accuracy.
4. Spindle motor: The high speed motor is used to make the machining center perform very well at high speed, low speed and light and heavy cutting.
5. Spindle head: It adopts high-precision and high-rigidity spindle head, which can withstand heavy cutting and long-time heavy cutting of radial and axial loads, and can process high precision.
6. Tool magazine: It adopts bucket type/disc type tool magazine to provide fast, stable and reliable tool exchange action. It is controlled by PLC software and fast quick change tool change action to reduce non-cutting time.
7. Electrical box: The electrical box is equipped with a heat exchanger to ensure the stability of the system. The external wiring part has a protective coil, which is heat-resistant and oil-resistant.
8. Lubrication system: use automatic de-pressure lubrication system to concentrate oil supply, with advanced depressurization intermittent oil supply system, provide timely, appropriate amount of oil for each lubrication point in timing, quantitative, constant pressure and individual ways, ensuring that each Lubricating the position to obtain the lubricating oil, so that the machining center is long. There is no worries about the operation.
9. Full-density sheet metal: The design of the gold plate machine for the xh7130 machining center is focused on aesthetics, environmental protection and ergonomics. The fully sealed sheet metal design completely prevents the cutting fluid and cutting fluid from splashing outside the machining center, so that the circumference of the machining center can be kept clean.
XH7130h vertical machining center technical parameters
| SPECIFICATIONS | XH7130 |
| Table size | 300x600mm |
| T-Slot (number-width) | 3--16 mm |
| Max. Load of table | 160kg |
| X, Y, Z Strokes | 500、300、450mm |
| Distance from spindle nose to table surface | 450mm |
| Distance from spindle axis to vertical guideway | 340mm |
| Rapid feed (X, Y, Z) | 20、20、12 m/min |
| Spindle speed | 50-8000r/min |
| Spindle taper | BT30 |
| Servo Main Motor Power | 3.0/3.7KW |
| Toolroom Capacity | 10 |
| Max. weight of tools | 6/4kg |
| Max. dia of tool (adjacent tools) | 100mm |
| Tool Changing Time | 9 S |
| Positioning Precision | ±0.012mm |
| Repositioning Precision | ±0.008mm |
| Machine Weight | 2800Kg |
| Overall Dimensions (L*W*H) | 1700*1500*2000mm |
